Configuring the Application
Configuring UPnP and DLNA
3FE-49441-ABAA-TCZZA
Issue 1
Table 8-40 USB parameters
Field Description
Enable FTP server Select this checkbox to enable using an FTP server.
Username Enter the username for the FTP server.
Password Enter the password for the FTP server.
Re-enter Password Re-enter the password for the FTP server.
Enable SFTP server Select this checkbox to enable using an SFTP server.
Enable SFTP for Remote Access Select this checkbox to enable SFTP for remote access.
Username Enter the username for the SFTP server.
Password Enter the password for the SFTP server.
Re-enter Password Re-enter the password for the SFTP server.
Enable Printer Sharing Select this checkbox to enable printer sharing.
Printer sharing is disabled by default.
Username Enter the username for the SFTP server.
Password Enter the password for the SFTP server.
Re-enter Password Re-enter the password for the SFTP server.
Connected USB Devices Table For each printer that is connected to the ONT, the following fields are displayed:
• Host Number for example: Printer1, Printer2
• Device Name: name or identification for the USB device
• Format: displays the storage format (applies only to a USB storage device)
• Total space (applies only to a USB storage device)
• Free space (applies only to a USB storage device)
3
Click Save.
Click Refresh to view the up-to-date information.
E
ND OF
STEPS
8.45 Configuring UPnP and DLNA
1
Click Application→UPnP and DLNA from the left pane in the GPON Home Gateway page.
The UPnP and DLNA page displays.
To Next Page
Need help?
General
