Maintenance
Overview
3FE-49441-ABAA-TCZZA
Issue 1
Maintenance
8.47 Overview
8.47.1 Purpose
This chapter describes the maintenance tasks supported by G-2426G-B ONTs.
8.47.2 Contents
8.47 Overview 180
8.48 Configuring the password 180
8.49 Configuring LOID 182
8.50 Configuring SLID 183
8.51 Managing the device 184
8.52 Backing up the configuration 185
8.53 Restoring the configuration 185
8.54 Upgrading firmware 186
8.55 Rebooting the device 187
8.56 Resetting to factory defaults 188
8.57 Diagnosing WAN connections 189
8.58 Viewing log files 191
8.48 Configuring the
password
A password must adhere to the password rules, which are as follows:
• the password may consist of uppercase letters, lowercase letters, digital numbers, and the
following special characters ! # + , - / @ _ : = ]
• the password length must be from 8 to 24 characters
• the first character must be a digital number or a letter
• the password must contain at least two types of characters: numbers, letters, or special
characters
• the same character must not appear more than 8 times in a row
When the password meets the password rules, the application displays the message “Your
password has been changed successfully”.
When the password does not meet the password rules, the application displays a message to
indicate which password rule has not been followed, for example:
• the password is too short
• the password is too long
To Next Page
Need help?
General
