5 Navigating the Panel Menus
Once access to the user access Level 2 menus is obtained (see
Section 4 Enabling User Access (Level 2), selection of menu
options is very simple to do.
With a menu option highlighted press the
or key to select.
Alternatively, use the numeric keypad and press the number of the
desired menu option to select that function. By default, when rst
displayed the rst available menu option is highlighted.
With the Main Menu all the listed options are available and the rst
is highlighted.
Working Example - Set/Change the Date/Time
With the Main Menu displayed on the LCD, press the numeric key
‘3’ to select the ‘Set Clock’ option.
Alternatively, use the
key to move the highlight down to option 3
and press either the or key to select the Set Clock function.
The function is cyclic, so if you overshoot the desired option just
try again using the same key.
See Section 5.3 Setting Time/Date for more details on how to set/
change the time and date.
OR
If the panel is part of a network you will be prompted to enter the node
ID (number) of the panel when accessing many of the user menus
described in this section.
OR
To Next Page
Loading...
Need help?
General
