Contents
1 Pearl™ 2-Loop Fire Control Panel
................................
1-1
1.1 Introduction ........................................................... 1-1
1.2 User Interface ....................................................... 1-1
1.2.1 LCD Primary Status Indicator .................................. 1-3
1.2.1.1 Non-quiescent Status Display ......................... 1-3
1.2.2 Function Keys .......................................................... 1-5
1.2.3 LED Status Indicators .............................................. 1-6
2 Fire & Fault Events - What to do ......................2-1
2.1 Fire Event ............................................................. 2-1
2.1.1 What do I Need to do?............................................. 2-1
2.1.2 Log Book Entry ........................................................ 2-1
2.1.3 Day MODE Operation.............................................. 2-2
2.1.4 Delays - What do I Need to do? .............................. 2-2
2.2 Fault Event ............................................................ 2-3
2.2.1 What do I Need to do?............................................. 2-3
2.2.2 Log Book Entry ........................................................ 2-3
2.3 RESET Key ........................................................... 2-4
3 Panel Status & User Level 1 Functions ..........3-1
3.1 Status Normal ....................................................... 3-1
3.2 Panel Controls and Menus ................................... 3-1
4 Enabling User Access (Level 2) .......................4-1
4.1 Passcode Entry ..................................................... 4-1
4.2 Keyswitch Entry .................................................... 4-1
5 Navigating the Panel Menus ............................5-1
5.1 Disable/Enable Menu ............................................ 5-2
5.1.1 Zones and Devices .................................................. 5-2
5.1.1.1 To Disable a Zone or Device ........................... 5-3
5.1.1.2 Panel Disablements over a Network ............... 5-3
5.1.2 Fault Relay Output................................................... 5-5
5.1.3 Fault Routing Outputs.............................................. 5-6
5.1.4 Delays to Outputs .................................................... 5-6
5.1.5 Time-of-Day Manual Override ................................. 5-7
5.2 Start/End Testing .................................................. 5-8
5.2.1 Zones....................................................................... 5-8
5.2.1.1 Testing Multiple Zones .................................... 5-9
5.2.1.2 To Cancel a Zone Walk Test ........................... 5-9
5.2.2 Auto High Test ....................................................... 5-10
5.2.3 Alarm Devices ....................................................... 5-10
5.2.4 LEDs ....................................................................... 5-11
5.2.5 LCD ....................................................................... 5-12
5.2.6 Internal Buzzer ...................................................... 5-13
5.3 Setting Time/Date ............................................... 5-14
5.3.1 Time ....................................................................... 5-14
5.3.2 Date ....................................................................... 5-14
5.4 View Status Menu ............................................... 5-15
5.4.1 Historic Log............................................................ 5-15
5.4.2 Device Status ........................................................ 5-16
5.4.3 Alarm Count........................................................... 5-18
To Next Page
Loading...
Need help?
General
