5.1.5 Time-of-Day Manual Override
Select option 4: Time-of-Day Manual Override to manually override
an active Time-of-Day program. This override function is only possible
if a program (up to ten programs are congurable) was congured at
system commissioning. If a Time-of-Day program is active the DAY
MODE LED is lit. However, if it has been overridden using this menu
option the DAY MODE LED extinguishes until the next congured
day mode period occurs or the Time-of Day program, if still active,
has been restored using this menu option.
In the example shown here only Time of -Day program 1 has been
congured. To disable this program, i.e. disable the congured change
to sensor sensitivity, press the
key. To cancel out of this function,
press the key.
Note: The overridden Time-of-Day program will return to its non-
overridden state for the beginning of the next congured day
mode period.
To Next Page
Loading...
Need help?
General
