5.4.3 Alarm Count
Each time the panel enters the alarm state since the system was
installed these events are logged, i.e. stored in memory for later
retrieval by the service engineer.
This menu option allows the alarm event total to be displayed on
the LCD.
Using the numeric keypad, press ‘3’ to select option 3: Alarm Count.
Alternatively, use the
key to highlight the Alarm Count option
and press the
key to select.
The number of times the alarm state has been entered is displayed.
Press the
key to exit the alarm count screen and return to the
View Status Menu screen.
To Next Page
Loading...
Need help?
General
