Notifier Fire Alarm Control Panel User Manual

Section 5 - 6
www.notierknowledge.com
997-670-000-2
Navigating the Panel Menus
Operating Manual
5.1.3 Fault Routing Outputs
Select option 3: Fault Routing Outputs to enable/disable the fault
routing output circuit(s).
To enable/disable the fault routing output(s) press the
key. Each
time the
key is pressed the enable/disable state changes (toggled).
Press the
key at any time to exit.
5.1.4 Delays to Outputs
This option is only available when delays have been congured as
part of one or more Cause & Effect rules. If any such delays are
congured the DELAYS ACTIVE LED is lit.
Select option 4: Delays to Outputs to disable/enable the delay to
alarm outputs.
To disable/enable any congured delays press the
key. Each
time the key is pressed the delay enable/disable state changes
(toggled).
Press the
key at any time to exit.

Notifier Fire Alarm Control Panel Specifications

General

Brand	Notifier
Model	Fire Alarm Control Panel
Category	Control Panel
Language	English