1.2.2 Function Keys
Panel operation, at user access Levels 1 and 2, is controlled by the
various function keys located on the front fascia.
The group of keys to the right of the LCD provide the following user
functions:
1. Function Control Keys.
These are single-function activation keys and, apart from the
MUTE BUZZER and CHANGE TAB keys, require the panel to be
at user access Level 2 before they can be selected, for example
the EXTEND DELAY function during the rst stage of an active two-
stage delay period.
2. Menu Navigation/option Selection Functions Keys.
With the panel at user access Level 2 these keys, in association
with the alphanumeric keypad, are now functional.
3. Alphanumeric Keys
These keys are available when the panel is at user access Level 2
and the user menus are available. Menu options can be selected
using these keys, as an alternative method to the
or
navigation and keys.
4. Other Function Keys
These are located to the left and below the LCD and comprise the
following:
a. Show More Zones in Fire key
b. Change Tabs key
c. Four user (programmable) Function keys.
To Next Page
Loading...
Need help?
General
