Setting Power Save Mode
Setting Up
2
Printing
3
Before use
1
Basic Device Operations
4
Appendix Index
- 116 -
Restrictions in sleep mode
This section explains the restrictions when the device is in sleep mode.
When the device is displaying an error, entering sleep mode may be disabled.
Printer driver utility restrictions
When the device enters sleep mode, the printer driver and utility functions are restricted as described
below.
OS Software name Restrictions in sleep mode
Windows Conguration Tool Network settings for the Network Setting plug-in are disabled.
Network Extension
Cannot connect to
device
.
Driver installer
When connected to a network, the
device
options information cannot be
acquired while installing the printer drivers.
Mac OS X NIC Setup Tool
Printer
searches and settings are disabled.
Printer drivers Printing is disabled when connected using EtherTalk. Connect to the
device using either Bonjour (Rendezvous) protocols or LPD protocols
(TCP/IP).
For advanced setup methods, see either “Using Bonjour (Rendezvous)”
(P.78) or “Adding Printers Using LPD (TCP/IP) Protocols” (P.123).
When the device enters sleep mode, press the [POWER SAVE] button on the control panel to check that
"Printing enabled" is displayed on the liquid crystal panel.
When "Printing enabled" is displayed, the restrictions described above do not apply.
To Next Page
Loading...
Need help?
General
