- 54 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
Mounting the Built-in HDD
(Optional)
Mount the (optional) built-in HDD to increase the
memory capacity or implement secure printing.
Reference
For the functions required by the HDD, see "Advanced".
Built-in HDD (model: HDD-C3G)
1
Turn OFF the device power supply, and
remove the cables.
Note
When turning OFF the power supply, make sure
to press the power switch and wait for shutdown
before turning OFF (O) the main power switch.
Reference
“Connecting Power Cables” (P.57)
“Turning OFF the Power Supply” (P.58)
2
Loosen the screws on the access cover
at the back of the printer (
), and
open the door (
).
3
Check that the internal LED lamp ( ) is
OFF.
4
Align the screws (x2) on the built-in
HDD to the holes on the device.
5
Rotate the screws (x2) in the direction
of the arrows to tighten securely.
6
Connect the HDD connectors to the
device.
To Next Page
Loading...
Need help?
General
