- 41 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
2. Setting Up
This chapter explains the methods for setting up the device, and for connecting the device to a PC and
installing the printer drivers.
Note
Customers who have purchased C941/ES9541dn should also see the "Separate Volume Spot Color Guide".
Reference
See the "Fiery XF Sever Quick Start Guide" for the methods of setting up the color management server for models C931/C941/
ES9431dn/ES9541dn.
Installing the Device
For safe and pleasant use of the device, install in a location that satised the "installation environment"
and "installation space" described in the "installation conditions". Further, the conditions also describe
the installation precautions. Make sure to read them before use.
Installation Conditions
Consider the following environmental conditions
before selecting the device installation location.
Installation Environment
Use in a location where temperature and
humidity are within the following ranges.
Ambient
temperature:
10ºC to 35ºC
Ambient
humidity:
10% to 85%RH (relative humidity)
Max. wet-bulb
temperature:
25ºC
Memo
Make sure there is no condensation.
If installing in a location where the ambient humidity is
30% or less, use a humidier or static prevention mat.
Installation Space
Make sure the area around the device has
the following space, and select a location that
can support the weight of the device before
installing. (The main unit weights are as follows:
C911/C931/ES9411dn/ES9431dn: Approx.
97kg*; C941/ES9541dn: Approx. 117kg.)
*: Includes consumables such as image drums and toner
cartridges, etc.
Plane view
620mm
1420mm
600mm
460mm
200mm
1770mm
Front view
400mm
1040mm
To Next Page
Loading...
Need help?
General
