- 69 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
Setting the Device Network
1
Check that the device and PC are
connected, and that the power is turned
ON, and then insert the "Software DVD-
ROM" into the PC.
2
When the "AutoPlay" window is
displayed, click [Run Setup.exe].
3
When the "User Account Control"
window is displayed, click [Yes].
4
Read the "Software License Agreement"
thoroughly, and click [Agree].
5
Read the "Environmental advice for
Users", and click [Next].
6
Set the printer model to be set, and
click [Next].
7
Select [Network connection], and click
[Next].
8
Click [Device Network Setup].
9
The printer search will start. Select the
device from the table when the printer
has been detected, and click [Next].
10
Enter the network setup information,
and click [Setup].
11
Enter the network setup password, and
click [OK].
To Next Page
Loading...
Need help?
General
