Advanced network settings > 101
9. Click Export Certificate.
10. Perform steps 1 to 3 in "Creating a certificate" on page 100 to enter the encryption
screen.
11. Follow the on-screen instructions to install a certificate from the certificate authority.
12. Click Submit.
13. Go to "Enabling encryption" on page 101 to enable encryption.
Enabling encryption
After you creating a certificate, perform the following procedure to enable encryption.
When you enable encryption, the communication is encrypted the next time you change
the settings from the web page.
1. Access the machine’s web page and log in as the administrator.
2. Select Admin Setup.
3. Select Network > Security > Protocol ON/OFF.
4. Select Enable for the desired protocol.
5. Click Submit.
Launching the web page
1. Launch a web browser.
2. Type the IP address of the MFP in the URL field of your browser and then press
Enter. For example http://10.18.207.102
To Next Page
Loading...
Need help?
General
