Operation > 55
L
OADING
DOCUMENT
(
S
)
The MFP can scan/copy/send document(s) either from the ADF (Automatic Document
Feeder) or on the glass. If you need to send multiple pages, load your papers in the ADF.
The ADF can hold up to 50 pages at one time.
If you need to scan/copy/send pages from books, newspaper clippings, or paper with
wrinkles or curls, place them on the glass.
P
LACING
DOCUMENT
(
S
)
IN
THE
ADF
Before using the ADF, please make sure that your paper meets the following specifications:
> Document(s) can range in size from 4.5 x 5.5 inches (114.3 x 139.7mm) to 8.5 x 14
inches (215.9 x 355.6mm).
> Document(s) can range in weight from 16 to 28 lbs (60 - 120 g/m
²
) and 0.002" to
0.006" sheet thickness.
> Document(s) should be square or rectangular and in good condition (not fragile or
worn).
> Document(s) should be free of curl, wrinkle, tears, wet ink, or punch holes.
> Document(s) should be free of staples, paper clips, paper sticky notes.
> Keep the glass clean and without any documents left on it.
1. If you have multiple pages, fan the pages to avoid paper jams. The ADF holds up to
50 pages at one time.
2. Place the document with the text face UP in the ADF and make sure that the top of
each page is fed in first.
3. Adjust the Paper Guides to centre the document in the ADF.
NOTE
To transmit irregular types of document(s), place the document(s) on the
glass or make a copy first and then transmit the copy instead.
b
a
c
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
