Scanning > 60
9. Set the subject from either:
> Subject List
> Screen Entry
10. Using the Down arrow key, scroll to File Name and press Enter.
11. Using the keypad or arrow keys and the on-screen keypad, type in the file name.
12. Highlight Done and press Enter.
13. If required, adjust the density setting:
(a) Using the Down arrow key, scroll to Density and press Enter.
(b) Highlight the required setting and press Enter.
14. If required, adjust the document size:
(a) Using the Down arrow key, scroll to *A4 and press Enter.
(b) Highlight the required setting and press Enter.
15. If required, adjust the file format:
> If you are sending a colour file;
(i) Using the Down arrow key, scroll to File Format(Color) and press
Enter.
(ii) Highlight the required setting and press Enter.
> If you are sending a black and white file;
(i) Using the Down arrow key, scroll to File Format(B/W) and press Enter.
(ii) Highlight the required setting and press Enter.
16. Press the Start button.
S
CAN
TO
USB
MEMORY
1. Plug the USB memory into the USB port at the front of the machine.
2. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
3. Using the Down arrow key, scroll to Scan and press Enter.
4. Using the Down arrow key, scroll to USB Memory and press Enter.
5. Press Enter to select File Name.
NOTE
This option is only available if USB Memory is plugged into the USB port on the
front of the machine.
NOTE
The default file format, compression rate and resolution can be changed if
required. See “Scan to USB Memory” on page 43.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
