Paper handling > 27
R
EMOVING
CONTINUOUS
FORMS
1. Tear off the continuous forms. See “Tearing off continuous forms” on page 26.
2. Press the LOAD/EJECT button to move the front edge of the continuous forms
backwards to the Pin Tractors.
3. Lift the Pin Tractor covers (1) and remove the forms.
4. Close the Pin Tractor covers.
NOTE
> The printer switches to off line mode.
> The ALARM indicator illuminates to indicate there is no paper present.
> If sprocket holes of the last page of the forms disengage from the
sprocket pins, do not attempt to eject the paper to avoid the possibility of
a paper jam.
1
To Next Page
Loading...
Need help?
General
