Consumables and accessories > 68
C
ONSUMABLES
AND
ACCESSORIES
C
ONSUMABLES
When the printed image becomes faint or incomplete, replace the ribbon cartridge.
C
HANGING
A
RIBBON
CARTRIDGE
1. Set the Power Switch to OFF.
2. Open the Top Cover and set the paper Thickness lever to position 10.
3. Move the carriage to the center (2) for ribbon replacement position.
CAUTION!
Only use genuine Original consumables to ensure the best quality
and performance from your hardware. Non Original products may
damage your printer’s performance and invalidate your warranty.
WARNING!
Do not change the ribbon cartridge with the Power Switch set to
ON.
WARNING!
The print head and area around it may be hot after printing. Allow
it to cool down before touching it.
To Next Page
Loading...
Need help?
General
