Oki ML5720 User Manual

Operating instructions > 40
S ETTING MENU VALUES
The following information explains the printer settings and how you can change them.
Printer items and their values are printed for reference.
C ONFIRMING CURRENT SETTINGS
To print the current menu settings, use a cut sheet of A4 paper or continuous forms of width
at least 254 mm. In this example, two sheets of A4 paper is used.
1. Set the Paper Type lever to cut sheet mode.
2. To activate menu mode:
(a) Ensure that the printer is powered ON.
(b) Place the cut sheet on the front Paper Tray.
The cut sheet is gripped by the printer.
(c) Press and hold down the CHR PITCH button and then the PRINT SPEED button
to enter menu mode, Menu print? is printed.
3. Press PRINT QUALITY (PRINT) button and the printer prints out all the menu items
currently selected and their corresponding settings.
4. Exit or proceed to change menu settings:
(a) To exit menu settings confirmation, save the current settings, press CHR PITCH
and PRINT SPEED buttons together. Save menu is printed.
Press LOAD/EJECT button to eject the cut sheet paper.
(b) To change the menu settings, see “Menu setting” on page 41.
TEAR + LF/FF On-line/Off-line
ML5720/ML5721 Performs microfeed (reverse) 1/144 inch
when paper is in tear off position.
ML5790/ML5791 Performs microfeed (reverse) 1/180 inch
when paper is in tear off position.
PRINT QUALITY + SEL On-line/Off-line
ML5720/ML5721 Performs microfeed (reverse) 1/144 inch
when paper is in Top of Form position.
ML5790/ML5791 Performs microfeed (reverse) 1/180 inch
when paper is in Top of Form position.
PRINT QUALITY + LF/
FF
On-line/Off-line
ML5720/ML5721 Performs microfeed (forward) 1/144 inch
when paper is in Top of Form position.
ML5790/ML5791 Performs microfeed (forward) 1/180 inch
when paper is in Top of Form position.
CHR.PITCH + PRINT
SPEED
On-line/Off-line Enters menu mode.
SWITCH STATUS FUNCTION

Oki ML5720 Specifications

General

Brand	Oki
Model	ML5720
Category	Printer
Language	English