K 2-8 Choosing a Shooting Mode
4 Highlight an interval using FG on the arrow pad.
• Select [Off] to disable the preview.
5 Press the OK button to select the highlighted option.
• The menus will be displayed.
6 Press the shutter button halfway to exit the menus.
• If an option other than [Off] is selected, [LIVE BULB] or
[LIVE TIME] will appear in the display.
7 Adjust aperture.
• At default settings, aperture can be adjusted using the
front dial.
ISO
200
1023
1:02:03
B
100
%
1
LIVE BULB
F5.6
30
p
30
p
4K
YFYF
Aperture
8 Take pictures.
• In bulb and live bulb modes, keep the shutter button
pressed. The exposure ends when the button is
released.
• In time and live time modes, press the shutter button all
the way down once to start the exposure and again to
end it.
• The exposure ends automatically when the time selected
for [Bulb/Time Timer] is reached. The default is [8 min].
The time can be changed. g [Bulb/Time Timer]
(P. 533)
• [Noise Reduct.] is applied after shooting. The display
shows the time remaining until the process is complete.
You can choose the conditions under which noise
reduction is performed (P. 533).
105
EN
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
