n 3-5 The Viewfi nder and Monitor Displays
Choosing the Information Displayed
Choose the indicators shown in the shooting display.
1 Press the INFO button repeatedly.
• The information displayed changes each time the INFO button is
pressed.
INFO button
INFO
INFOINFO
Basic info
(Custom Display 1)
M-ISM-IS
1
1:02:03
n
LL
R
R
0.0
C-AF
123
min
1
TC 00:00:00:00 DF
250 F5.6
ISO-A
200
Info hidden
123
min
1
Custom Display 2
M-ISM-IS
1
1:02:03
n
LL
R
R
250 F5.6
C-AF
0.0
123
min
1
30
p
30
p
4K
TC 00:00:00:00 DF
ISO-A
200
• At default settings, the basic info display shows the indicators selected for Custom
Display 1. Custom Display 2 is hidden. These settings can be changed via the menus.
You can also display data from GPS and other sensors. Use [n Display Settings] >
[n Info Settings] (P. 429).
• You can also hold the INFO button and rotate the front or rear dial to choose the
information displayed. The displays can be cycled in either direction.
Histograms
Histograms graph the distribution of brightness
in an image. The horizontal axis shows
brightness, the vertical axis the number of
pixels. During shooting, pixels brighter than the
upper limit are shown in red and pixels darker
than the lower limit in blue.
The Level Gauge
The level gauge shows camera tilt. Pitch is shown by the vertical bar, roll by the
horizontal bar. The level gauge is intended as a guide only.
Many
Few
Dark Bright
327
EN
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
