K 2-15 Flash Photography
Wireless Remote Flash Control
Wireless fl ash photography is available with compatible fl ash units that support
wireless remote control (RC). The remote fl ash units are controlled via a unit
mounted on the camera hot shoe. Settings can be adjusted separately for the
camera-mounted unit and units in up to three other groups.
RC mode must be enabled on both the master and remote fl ash units.
Enabling RC Mode
1 Press the MENU button to display the menus.
2 Display G Custom Menu W (#Custom).
3 Highlight [#RC Mode] using FG on the arrow pad
and press the I button.
4 Highlight [On] using the FG buttons and press the
OK button.
• The camera will exit to the shooting display.
• An q icon will be displayed. q icon
ISO-A
200
1023
1:02:03
P
100
%
1
S-IS AUTOS-IS AUTO
250 F5.6
RC
#
0.0
30
p
30
p
4K
YFYF
5 Press the OK button.
• The RC mode super control panel will be displayed.
• The standard LV super control panel can be displayed by
pressing the INFO button. The display will change each
time the INFO button is pressed.
A Mode
P
250
1023
1:02:03
F5.6
100
%
1
TTL
Manual
Off
+5.0
TTL +3.0
1/8
–
Low
1
Ch
RC mode super control
panel
262
EN
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
