1-5 Initial Setup
3 After highlighting the desired language, press the
OK button.
• If you press the shutter button before pressing the OK
button, the camera will exit to shooting mode and no
language will be selected. The language selection dialog
can be displayed by turning the camera off and then
on again, after which you can repeat the process from
Step 1.
• The language can be changed at any time from the
e setup menu. g [W] (P. 455)
4 Choose the time and date.
• Highlight items using the HI buttons.
• Edit the highlighted item using the FG buttons.
• The clock can be adjusted at any time from the e setup
menu. g [X Settings] (P. 455)
• Press the OK button when settings are complete.
24 hour clock
5 Highlight a time zone using the FG buttons and
press the OK button.
• Press the INFO button to enable or disable daylight
saving time.
6 Press the OK button to set the clock.
• Leaving the camera with the batteries removed may cause the clock to be reset.
• Choose the frame rate as necessary before recording movies. g [nK] (P. 321)
%
• The clock can be automatically updated via GPS. g “Correcting the Clock Using GPS”
(P. 48)
46
EN
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
