Omron CJ - INSTRUCTIONS User Manual

3. Instructions
228
CS/CJ/NSJ Series Instructions Reference Manual (W474)
TIMU/TIMUX
Applicable Program Areas
Operands
N: Timer Number
The timer number must be between 0000 and 4095 (decimal).
S: Set Value
The set value must be between #0000 and 9999 (BCD).
&0 to 65535 decimal or #0000 to FFFF hex (Binary).
z Operand Specifications
Flags
Instruction Mnemonic Variations
Function
code
Function
TENTH-MS TIMER
TIMU --- 541
TIMU(541)/TIMUX(556) operates a decrementing
timer with units of 0.1-ms.
TIMUX --- 556
Symbol
TIMU TIMUX
BCD Binary
Area
Function block
definitions
Block program areas Step program areas Subroutines Interrupt tasks
SFC action or transition
programs
Usage OK Not allowed OK OK Not allowed OK
Operand Description
Data type
Size
TIMU TIMUX
N Timer Number TIMER TIMER 1
S Set Value WORD UINT 1
Area
Word addresses
Indirect DM/EM
addresses
Con-
stants
Registers Flags
Pulse
bits
TR
bits
CIO WR HR AR T C DM EM
@DM
@EM
*DM
*EM
DR IR
Indirect
using IR
TK CF
N --- --- --- ---
OK
--- --- --- --- --- --- ---
--- OK --- --- --- ---
S OKOKOKOK OKOKOK OK OK OK OK
Name Label Operation
Error Flag P_ER • ON if timer number N is indirectly addressed through an Index Register but the address in the Index
Register is not the address of a timer's Completion Flag or PV.
• ON if in BCD mode and S does not contain BCD data.
• OFF in all other cases.
Equals Flag P_EQ Unchanged
Negative Flag P_N Unchanged
TIMU(541)
N
S
S: Set value
N: Timer number
TIMUX(556)
N
S
S: Set value
N: Timer number

Omron CJ - INSTRUCTIONS Specifications

General

Brand	Omron
Model	CJ - INSTRUCTIONS
Category	Controller
Language	English