3. Instructions
730
CS/CJ/NSJ Series Instructions Reference Manual (W474)
High-speed Counter/Pulse Output
Instructions
INI
Applicable Program Areas
Operands
Instruction
Mne-
monic
Varia-
tions
Function
code
Function
MODE CONTROL INI @INI 880
INI(880) is used to start and stop comparison for a comparison table, to
change the present value (PV) of a high-speed counter, to change the
PV of an input interrupt in counter mode, to change the maximum value
of the ring counter (CJ2M only), to change the PV of a pulse output
(e.g., to 0 to establish the origin), to stop pulse output, or to change the
settings for origin searches/returns (CJ2M only).
Symbol
INI
Area
Function block
definitions
Block program areas Step program areas Subroutines Interrupt tasks
SFC action or transition
programs
Usage OK OK OK OK OK OK
Operand Description Data type Size
P Port specifier --- 1
C Control data --- 1
NV First word with new PV DWORD Variable
NV: First word with new PV
INI(880)
P
C
NV
P: Port specifier
C: Control data
To Next Page
Loading...
Need help?
General
