Omron CJ - INSTRUCTIONS User Manual

3. Instructions
158
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Sequence Output Instructions
OUT/OUT NOT
Applicable Program Areas
Operands
z Operand Specifications
*1 CJ2 CPU Units only.
Flags
There are no flags affected by this instruction.
Function
Instruction Mnemonic Variations
Function
code
Function
OUTPUT OUT !OUT ---
Outputs the result (execution condition) of the
logical processing to the specified bit.
OUTPUT NOT OUT NOT !OUT NOT ---
Reverses the result (execution condition) of the
logical processing, and outputs it to the specified
bit.
Symbol
OUT OUT NOT
Area
Function block
definitions
Block program areas Step program areas Subroutines Interrupt tasks
SFC action or transition
programs
Usage OK Not allowed OK OK OK OK
Operand Description Data type Size
--- --- BOOL ---
Area
Word addresses
Indirect DM/EM
addresses
Con-
stants
Registers Flags
Pulse
bits
TR
bits
CIO WR HR AR T C DM EM
@DM
@EM
*DM
*EM
DR IR
Indirect
using IR
TK CF
OUT
OK OK OK OK --- ---
OK*
1
OK*
1
--- --- --- --- --- OK --- --- --- OK
OUT NOT
z OUT
If there is no immediate refreshing specification, the status of the execution condition (power flow) is
written to the specified bit in I/O memory. If there is an immediate refreshing specification, the status of
the execution condition (power flow) is also written to the Basic Output Unit's output terminal in addition
to the output bit in I/O memory.
z OUT NOT
If there is no immediate refreshing specification, the status of the execution condition (power flow) is
reversed and written to a specified bit in I/O memory. If there is an immediate refreshing specification,
the status of the execution condition (power flow) is reversed and also written to the Basic Output Unit's
output terminal in addition to the output bit in I/O memory.

Omron CJ - INSTRUCTIONS Specifications

General

Brand	Omron
Model	CJ - INSTRUCTIONS
Category	Controller
Language	English