Omron E5CN-H Communications Manual

CompoWay/F
2.3 Detailed Description of the Services
2-13
■ Composite Write to Variable Area
This service writes in order the contents of specified addresses to a
variable area.
Service Request PDU
Service Response PDU
(1) Variable Type and Write Start Address
For details on variable types and write start addresses, see SECTION 3
Communications Data for CompoWay/F and SYSWAY.
(2) Bit Position
The E5CN/AN/EN-H does not support bit access. Fixed to “00.”
(3) Number of Write Data Items (Variable Type + Write Data)
(4) Response Code
Normal Completion
1101 Area type error The variable type is
wrong.
110B Response too long The number of elements
exceeds the maximum.
1100 Parameter error Bit position is not “00.”
2203 Operation error EEPROM error
Response code Error name Cause
Write data length Number of write data items
For double word 12 max.
For word 17 max.
Response code Name Description
0000 Normal completion No errors were found.
Variable
type
Write
address
Variable
type
Write data
22
MRC
SRC
0113
00
224
00
224
Write data
Write
address
Bit
position
Bit
position
Number of elements ×8 or 4
Number of elements ×8 or 4
MRC SRC
0113
22 4
Response
code

Omron E5CN-H Specifications

General

Brand	Omron
Model	E5CN-H
Category	Controller
Language	English