Omron E5CN User Manual

142
Conventions Used in this Section Section 5-1
5-1 Conventions Used in this Section
5-1-1 Meanings of Icons Used in this Section
Describes the functions of the parameter.
Describes the setting range and default of the parameter.
Used to indicate parameters used only for monitoring.
Describes the parameter settings, such as those for Operation Commands,
and procedures.
Used to indicate information on descriptions in which the parameter is used or
the names of related parameters.
5-1-2 About Related Parameter Displays
Parameters are displayed only when the conditions for use given on the right
of the parameter heading are satisfied. Protected parameters are not dis-
played regardless of the conditions for use, but the settings of these parame-
ters are still valid.
5-1-3 The Order of Parameters in This Section
Parameters are described level by level.
The first page of each level describes the parameters in the level and the pro-
cedure to switch between parameters.
5-1-4 Alarms
It will be specified in this section when alarms are set for the Control Output 1
or 2 Assignment parameters, or for the Auxiliary Output 1 or 3 Assignment
parameters. For example, when alarm 1 is set for the Control Output 1 Assign-
ment parameter, it will be specified that alarm 1 is assigned.
Assigning a work bit to either control output 1 or 2 or to auxiliary output 1 to 3
is also considered to be the same as assigning an alarm. For example, if work
bit 1 is set for the Auxiliary Output 1 Assignment parameter, then alarms 1 to 3
have been assigned.
Function
Setting
Monitor
Operation
See
See
at
Dis
p
la
y
ed s
y
mbol
AT Execute/Cancel
Parameter name
The E5CN must be in operation, and
control must be 2-PID control.
Conditions for use

Omron E5CN Specifications

General

Brand	Omron
Model	E5CN
Category	Temperature Controller
Language	English