Omron FHV7 series User Manual

Precautions for Correct Use
Do not edit the file or folders which saved to sensor controller project.
Doing so could cause the sensor controller to not start up normally when loading the project file.
Editing a Template
By editing a template before using it, it is possible to omit un-needed setting data.
l
Template editor screen
The settings for Template editor are explained here.
Item
Set value
[Factory default]
Description
Template’s
name
• [All]
• Common setting
• Line 0 + Common setting
• Line 0
A selected template is reflected by Template’s
name.
When creating a new template, you can specify the
template's name using up to 256 characters. The al-
lowable number of characters is the same for dou-
ble-byte and single-byte characters.
Button Description
Initialize When initializing the setting of a template, click Initialize button. Available templates are
All, Common setting, Line 0 + Common setting and Line 0. The data edited the template
is initialized and can not be returned to the edited data.
Create
Create a new template. (
*1
) Input a template’s name and select the setting data, and then
click Create button.
Refer to Create a template on page 9 - 23.
Update Without changing the template’s name, the selection of setting data is changed. Select
the template and select the setting data, and then click Update button.
Refer to Updating a template on page 9 - 24.
9 Saving/Loading Data
9 - 22
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English