Omron FHV7 series User Manual

A-12
Sharing Data Within the Controller
[User Data Tool]
This function can not be used with the FHV series.
This tool is used to share data within the Controller.
The data set as user data is shared between scenes or scene groups. Data sharing across lines is not
allowed in Multi-line Random Trigger Mode. The data variables that are created are stored in the user
data region on the Controller.
Use the User Data Tool to edit data, specify initial values, and enter data comments. Use the User
Data processing item to set or reference the values in the data that you set with the User Data Tool.
Refer to User Data in the Vision System FH/FHV Series Processing Item Function Reference Manual
(Cat. No. Z341).
Precautions for Correct Use
When creating a measurement flow newly, use System variables.
For details, refer to 5-5-4 Using Variables on page 5 - 43.
User Data Area
User Data
Tool
Processing item
User data
Edits applied.
Tool
Tool
Setting data
Referencing data
Data edited.
A-12-1
Setting Procedure for User Data
1 To set user data, select User data tool from the Tool menu in the Main Window.
The User data tool dialog box is displayed.
2 Click the data to set.
The data, 0.0000 (Not set), shows that user data has not been created yet.
When using user data, be sure to set the value.
When setting 0 as the default, set 0.
Appendices
A - 37
FH/FHV Series Vision System User’s Manual (Z365-E1)
A-12 Sharing Data Within the Controller [User Data Tool]
A
A-12-1 Setting Procedure for User Data

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English