Omron FHV7 series User Manual

1-2
Flow of Application
The following table shows the flow for using the FH/FHV.
Procedure Description Reference
Preparations Installation and Wiring
• Vision System FH Series Hardware Setup
Manual (Cat. No. Z366), FH Instruction
Manual
• FHV Series Smart Camera Setup Manual
(Cat. No. Z408), FHV Instruction Manual
↓
Turning ON Power
• Vision System FH Series Hardware Setup
Manual (Cat. No. Z366), FH Instruction
Manual
• FHV Series Smart Camera Setup Manual
(Cat. No. Z408), FHV Instruction Manual
↓
Language Selection in Dialog Box (only
when the Sensor Controller is started for the
first time)
For the FHV series, refer to 10-1 Remotely
Operating the Controller [Remote Operation]
on page 10 - 3 and set the condition for re-
mote operation.
Refer to 4-1 Selecting Language [Startup
Settings] on page 4 - 2.
↓
Main Window (Layout 0) Display Refer to 8-2 Adjustment Windows and Run
Windows on page 8 - 9.
↓
Camera Adjustments (Display the settings di-
alog box for a Camera Image Input process-
ing item.)
Refer to 3-1 Preparing the Controller and
Cameras on page 3 - 2.
↓
Select Tool - System settings, and then un-
der Startup setting, set the settings for
Basic, Communication, and Operation mode.
Refer to Section 4 Setting the Controller on
page 4 - 1.
↓
Click the Data save button, and then select
Function - System restart.
Refer to 3-6 Saving Settings before Turning
OFF the Power and Restarting on page
3 - 31.
↓
Select Tool - System settings, and then set
the settings for Camera, Communication and
Other.
Refer to Section 4 Setting the Controller on
page 4 - 1.
↓
Click the Data save button. Refer to 3-6 Saving Settings before Turning
OFF the Power and Restarting on page
3 - 31.
↓
1 Overview
1 - 6
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English