To Next Page

To Previous Page

8. Press the Shift Key to display the prior set value Ć199.99 for changing. The

PROG indicator will flash.

Set Value LED Display Model Basic Model

9. Press the Up and Shift Keys to set the value to 001.00. The input will be vali-

dated automatically if no change is made for five seconds. The inp.1 input

value 1 setting will be displayed again.

Note Press the Mode Key to enter the set value immediately. The dsp.1 dis-

play value 1 setting will be displayed for setting the next parameter.

Set Value LED Display Model Basic Model

10. Press the Mode Key to display the dsp.1 display value 1 setting.

Set Value LED Display Model Basic Model

11. Press the Shift Key to display the prior set value -19999 for changing. The

PROG indicator will flash.

Set Value LED Display Model Basic Model

12. Press the Up and Shift Keys to set the value to 00000. The input value will be

validated automatically if no change is made for five seconds. The dsp.1 dis-

play value 1 setting will be displayed again.

Note Press the Mode Key to enter the set value immediately. The decĆp

decimal point position setting will be displayed for setting the next pa-

rameter.

Set Value LED Display Model Basic Model

13. Press the Mode Key to display the decĆp decimal point position setting.

Set Value LED Display Model Basic Model

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron K3NX User Manual

Other manuals for Omron K3NX