Omron NJ Series Network Connection Guide

8. Initialization Method
8.1.2. CPU Unit
To initialize the settings of the Controller, select Clear All Memory from the Controller
Menu of the Sysmac Studio. The Clear All Memory Dialog Box is displayed. Click the OK
Button.
8.2. Initializing the Displacement Sensor
For the initialization of the Displacement Sensor, refer to Initializing Settings in 9-11 Setting
the System of the ZW Series Displacement Sensor (Confocal Fiber Type) User's Manual (Cat.
No. Z332).
43

Omron NJ Series Specifications

General

Brand	Omron
Model	NJ Series
Category	Controller
Language	English