36
Outline Section 1-1
1-1-15 Version Upgrade Information
The following functions have been added to the CS1W-LCB01 and CS1W-
LCB05 Loop Control Boards with the upgrade from Ver. 3.5 to Ver. 3.6.
• Select the appropriate unit version when registering an LCB/LC001 in CX
Process Tool (select Insert - Insert Node from the Settings Menu). If the
setting is incorrectly set to V1.0, V1.5, or V2.0, select Convert LCB
Model from the Execute Menu, and increase the unit version of the
LCU/LCB o the later version.
Status Operating status
of Unit or Board
1) ITEMs in Sys-
tem Common
Block
2) Flags in the
allocated CPU
Bus Unit area
(word n)
1) ITEMs in System Common Block
2) Flags in Auxiliary Area word A355
OR output of all
Function Block
alarms
None Flags in Auxiliary Area word A356
Other None Inner Board Flags in Auxiliary Area words A401, A402, and
A424
Command
Bits
START Mode at
Power ON
None Auxiliary Area word
A609
Not supported.
Area Item Loop Control
Unit
Loop Control
Board
Process-control
CPU Unit
Loop-control CPU
Unit
Item Ver. 1.0 Ver. 1.5 Ver. 2.0 Ver. 3.0 Ver. 3.5 Ver. 3.6
Compatible CX-Process Tool version Ver. 3.2 or
lower
Ver. 3.2 or
higher
Ver. 4.0 or
higher
Ver. 5.0 or
higher
Ver. 5.2 or
higher
Ver. 5.2 or
higher (See
note.)
PV Lag Offset Correction
PV lag offset correction improves
tracking set values during program
control, using Basic PID blocks (Block
Model 011) or Advanced PID blocks
(Block Model 012).
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Supported
Segment Program 3 block (Block
Model 158) added.
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Supported Supported
Data backup during Loop Controller
operation added.
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Supported Supported
Simple backup file recovery using
FINS command added.
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Supported Supported
Improved Segment Program 2 block
(Block Model 157) functionality
Not sup-
ported
Not sup-
ported
Not sup-
ported
Not sup-
ported
Supported Supported
Online editing of sequence tables Not sup-
ported
Supported Supported Supported Supported Supported
Displaying PVs and changing SPs for
timers and counters in sequence
tables
Not sup-
ported
Supported Supported Supported Supported Supported
Bank Selector block (Block Model
168) for PID constants
Not sup-
ported
Supported Supported Supported Supported Supported
Split Converter block (Block Model
169)
Not sup-
ported
Supported Supported Supported Supported Supported
Disturbance overshooting suppres-
sion for Basic PID (Block Model 011)
and Advanced PID (Block Model 012)
Not sup-
ported
Supported Supported Supported Supported Supported
To Next Page
Loading...
Need help?
General
