En-12
Connecting Your Components
• Refer to the instructions that came with the component you are connecting.
• Do not plug in the power cord until all other connections are complete.
• Do not bind audio cables with power cords and speaker cables.
Doing so may adversely affect the sound quality.
• To prevent interference, keep power cords and speaker cables as far away as
possible from the antennas.
• Push each plug in all the way to make a good connection
(loose connections can cause noise or malfunctions).
Before Making Any Connections
Cable and Jacks
Balanced AES/EBU
This is a professional digital audio interface.
Balanced AES/EBU cables are used for better noise
immunity and longer cable runs.
The maximum sampling rate for PCM output is
96kHz/24bit, 2ch.
Optical digital audio
Optical digital connections allow you to enjoy digital
sound such as PCM. The maximum sampling rate for
PCM output is 96kHz/24bit, 2ch.
Coaxial digital audio
Coaxial digital connections allow you to enjoy digital
sound such as PCM. The maximum sampling rate for
PCM output is 96kHz/24bit, 2ch.
Analog audio (RCA)
Analog audio connections (RCA) carry analog audio.
USB
The network tuner supports high-speed USB 2.0.
You can connect USB memory or iPod/iPhone.
To use (Remote Interactive), you need to connect
your Onkyo AV components with an cable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
