En-19
Listening to the Radio—Continued
With the built-in tuner, you can enjoy DAB digital radio.
1
Press the tuner’s [INPUT] button, or the
remote controller’s [TUNER] button to
select “DAB”.
When tuned into a DAB station, the station name
will be displayed.
2
Use the TUNING []/[] buttons to select
the DAB stations.
You can also use the remote controller’s arrow
[
]/[] buttons to selected DAB stations.
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III for the
multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Scan Function Manually
1
Press the [SETUP] button.
2
Use the arrow []/[] button to select
“1.Hardware Setup” and then press
[ENTER].
3
Use the arrow []/[] button to select
“1.DAB Scan?” and then press [ENTER].
4
Use the arrow []/[] button to select “WW”
or “UK”, (see “DAB Scan?” on page 20),
and then press [ENTER] to stat Auto Tuning
function.
To cancel Auto Tuning, press the [ENTER] button.
If no station is detected after scanning, “No
Station” appears on the display.
Notes:
• This procedure can also be performed on the receiver
by using [SETUP], TUNING [
]/[], PRESET []/
[
], and [ENTER].
• Press [RETURN] to return to the previous step.
Displaying DAB Radio Information
Press the [DISPLAY] button repeatedly to display more
information about the selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS text
data, the text will scroll across the display.
Listening to DAB Digital Radio
To Next Page
Loading...
Need help?
General
Weight and Dimensions
