En-22
Listening to the Radio—Continued
Displaying Radio Text (RT)
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
1
Press the [RT/PTY/TP] button once.
The RT information scrolls across the display.
Notes:
• The message “Waiting” may appear while the
tuner waits for the RT information.
• If the message “No Text Data” appears on the dis-
play, no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Press the [RT/PTY/TP] button twice.
The current program type appears on the display.
2
Use the PRESET []/[] buttons to select
the type of program you want.
See the table on page 21.
3
To start the search, press [ENTER].
The tuner searches until it finds a station of the
type you specified, at which point it stops briefly
before continuing with the search.
4
When a station you want to listen to is
found, press [ENTER].
If no stations are found, the message “Not Found”
appears.
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
1
Press the [RT/PTY/TP] button three times.
If the current radio station is broadcasting TP
(Traffic Program), “[TP]” will appear on the
display. If “TP” without square brackets appears,
this means that the station is not broadcasting TP.
2
To locate a station that is broadcasting TP,
press [ENTER].
The tuner searches until it finds a station that’s
broadcasting TP.
If no stations are found, the message “Not Found”
appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
