11
Part Names
Front Panel
A ON/STANDBY button
B PURE AUDIO button/indicator: Switches to the
Pure Audio mode. The indicator lights when the
mode is on. ( →p196)
C HYBRID STANDBY indicator: Lights up when
any of the following functions is working or
enabled in standby state of this unit. When this
indicator is lighting, the power consumption in
standby state increases, however, the increase
in power consumption is minimized by entering
the HYBRID STANDBY mode where only the
essential circuits operate.
– HDMI CEC ( →p143)
– HDMI Standby Through ( →p143)
– USB Power Out at Standby ( →p150)
– Network Standby ( →p150)
– Bluetooth Wakeup ( →p151)
D Display ( →p13)
E Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
F Input selector buttons: Switches the input to
be played.
G ZONE 2/ZONE 3 buttons: Controls the multi-
zone function. ( →p107)
OFF button: Switches the multi-zone function
off.
H LISTENING MODE button/dial: Press the
LISTENING MODE button (above) to select a
category from "Movie/TV", "Music" and "Game",
and then turn the LISTENING MODE dial (below)
to change the listening mode ( →p89).
I TONE button/dial: Adjusts the sound quality.
Press the TONE button (above) to select an item
to adjust from "Bass", "Vocal" and "Treble", and
turn the TONE dial (below) to adjust.
J Front ap
K MASTER VOLUME
AB
C
DEFG
HI
To Next Page
Loading...
Need help?
General
Weight and Dimensions
