18
Remote Controller
A ON/STANDBY button
B Input selector buttons: Switches the input to be
played.
C Play buttons: Used for playback operations
for the Music Server ( →p116) or USB device
( →p114). Also, switching to "CEC MODE"
with "19. MODE button" allows you to operate
an HDMI CEC function-enabled AV component.
(Some devices may not be operated.)
D Q (QUICK MENU) button: Pressing this button
during playback allows you to make settings
such as "HDMI" and "Audio" quickly on the TV
screen while playing. ( →p91)
E Cursor buttons and ENTER button: Select
an item with the cursors, and press ENTER to
conrm your selection. Pressing / button
allows you to switch the screen when a music
folder list or le list is not displayed on one
screen on the TV.
F button: Displays advanced setting items on
the TV or the display to have a more enjoyable
experience with this unit. ( →p124)
G SLEEP button: You can allow the unit to enter
standby automatically when the specied time
has elapsed. Select the time from "30 min",
"60 min", "90 min" and "Off". When you do not
want to turn the unit to standby automatically,
select "Off". You can also set this by pressing
button and selecting "5. Hardware" - "Power
Management" - "Sleep Timer" ( →p150) on the
Setup menu.
H HDMI MAIN/SUB button: Select the HDMI OUT
jack to output video signals from "MAIN", "SUB",
and "MAIN+SUB".
I button: Switches the information on the
display and is used to operate RDS ( →p84).
Also, when the "BLUETOOTH" input selector is
selected, pressing and holding this button for 5
seconds or more will switch to the pairing mode.
J button: Returns the display to the previous
state while setting.
K MUTE button: Temporarily mutes audio.
Press the button again to cancel muting.
To Next Page
Need help?
General
Weight and Dimensions
