Orolia EdgeSync User Manual

30 | EdgeSync Manual rev 1 orolia.com
PTP :: Unicast
Legend: RO = Read Only, RW = Read/Write, WO = Write Only
Labels
Access
Description
Port 1 and Port 2
Unicast Operation
RW
Control of Unicast operation. The options are:
DISABLED,
MASTER,
SLAVE,
BOTH,
MIXED
Negotiation
RW
Control for unicast negotiation, ON / OFF
Transmission Duration
(s)
RW
Unicast transmission duration
The range is 60 – 3600 seconds
Apply / Clear
Apply Button
WO
Click for selection and settings to be applied to the EdgeSync
Clear Button
WO
Click to clear the latest changes
MIXED Mode
PDelay
RW
Auto: pDelay responses will be multicast or unicast depending
on pDelayReq
Unicast: pDelay request and responses are always unicast
Peer Address
RW
Unicast peer address to use for peer delay mechanism
Delete Unicast Peer Address
Peer Address
RW
Remove Unicast peer address to add a different one
Add Master Node
Network Address
WO
IPv4 address of Master node to be added, four dot separate
octets (0- 255) or Ethernet address, six dash separated
double hexadecimal numbers (NN-NN-NN-NN-NN-NN)
ClockID [optional]
WO
Master Clock ID – optional field. Enter eight colon separated
double hexadecimal numbers (NN:NN:NN: NN:NN:NN:NN:NN).
Clock Priority
WO
Clock priority
Range is 0 - 255
Sync Interval
WO
Configure the PTP Sync packet interval. The unit is in log to
the base 2. For example,
value = -5 is 32 packets/second, or
value = 0 is 1 packet /second, or
value = 2 is 1 packet in 4 seconds
The range is -8 to +2
Delay Request Interval
WO
Configure PTP Delay Request interval. The unit is in log to the
base 2. For example,
value = -5 is 32 packets/second, or
value = 0 is 1 packet /second, or
value = 2 is 1 packet in 4 seconds

Orolia EdgeSync Specifications

General

Brand	Orolia
Model	EdgeSync
Category	Switch
Language	English