Owon TAO3000 Dual-Channel Series User Manual

10.Technical Specifications
126
10. Technical Specifications
Unless otherwise specified, the technical specifications applied are for
TAO3000 dual-channel series only, and Probes attenuation set as 10X. Only if
the oscilloscope fulfills the following two conditions at first, these specification
standards can be reached.
 This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on
P13).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Oscilloscope
Performance Characteristics
Instruction
Bandwidth
TAO3072
TAO3072A
70 MHz
TAO3102
TAO3102A
100 MHz
TAO3122
TAO3122A
120 MHz
Vertical Resolution (A/D)
TAO3072
TAO3102
TAO3122
8 bits
TAO3072A
TAO3102A
TAO3122A
8 bits/12 bits/14 bits
Channel
2
Waveform Capture Rate
45,000 wfms/s
Multi-level Gray Scale Display &
Color Temperature Display
(Use gray scale to indicate frequency of
occurrence, where frequently occurring
waveform are bright.)
Support
Magnifier Function
(The magnifier window can display the
magnified wave of the wave selection
horizontally and vertically.)
TAO3072
TAO3102
TAO3122
Not support
TAO3072A
TAO3102A
TAO3122A
Support
Acquisition
Mode
Normal, Peak detect, Averaging
Sample rate
TAO3072
Dual CH
500 MSa/s

Owon TAO3000 Dual-Channel Series Specifications

General

Brand	Owon
Model	TAO3000 Dual-Channel Series
Category	Test Equipment
Language	English