Owon TAO3000 Dual-Channel Series User Manual

10.Technical Specifications
131
Sample Point
5% to 95%
Frame Type
Data, Remote, Error, Overload
Multimeter
Performance
Characteristics
Instruction
Full scale
reading
4½ digits (Max 19999 – count)
Diode
0 V - 2 V
Input
impedance
10 MΩ
On/Off
measurement
<50Ω beeping
Capacitance
2nF - 20mF: ±(4.0%+10 digit)
Voltage
DCV: 20mV, 200mV: ±(0.5%+10digit);
2V, 20V, 200V: ±(0.3%+5digit);
1000V: ±(0.5%+5digit)
Max. input: DC 1000V
ACV: 20mV, 200mV, 2V, 20V, 200V: ±(0.8%+10digit)
750V: ±(1%+10digit)
Frequency: 40Hz-1000Hz, Max. input: AC 750V (virtual value)
Current
DCA: 20A: ±(2%+10digit)
ACA: 20A: ±(2.5%+10digit)
Impedance
200Ω: ±(0.8%+10digit) 2KΩ - 2MΩ: ±(0.5%+3digit)
20MΩ: ±(0.8%+5digit) 100MΩ: ±(5.0%+10digit)
General Technical Specifications
Display
Display Type
8" Colored LCD (Liquid Crystal Display)
Display Resolution
800 (Horizontal) × 600 (Vertical) Pixels
Display Colors
65536 colors, TFT screen
Output of the Probe Compensator
Output Voltage
(Typical)
About 5 V, with the Peak-to-Peak voltage ≥1 MΩ.
Frequency (Typical)
Square wave of 1 KHz
Power
Mains Voltage
100V – 240 VACRMS, 50/60 Hz, CAT Ⅱ
Power Consumption
＜15 W
Fuse
2 A, T class, 250 V
Battery
7.4V, 8000mAh
The battery can last approximately 5 hours (differ in
models) after a full recharge.
Environment

Owon TAO3000 Dual-Channel Series Specifications

General

Brand	Owon
Model	TAO3000 Dual-Channel Series
Category	Test Equipment
Language	English