Watching Television
Notes
The GUIDE Plus+ list is not displayed
immediately after initial tuning is done.
Refer to “GUIDE Plus+ system” (➔ 38) for detail information.
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit.
This DVD recorder has a tuner which allows it to directly receive and record
digital terrestrial channels.
Important:
This unit does not have an analogue broadcast tuner.
to turn the unit on.
The GUIDE Plus+ list
appears.
–
Prog. Type
e
,
r
to select the current programme, then
e
,
r
to select “View”, then
Selecting a Channel without TV Guide
To select desired channel
Press [
1
,
2
CH].
To directly enter Channels
You can also select channels with the numbered buttons.
e. g., “5”: [0] ➔ [0] ➔ [5] or [5] ➔ [OK]
“15”: [0] ➔ [1] ➔ [5] or [1] ➔ [5] ➔ [OK]
Watching Satellite Programmes
Preparation:
Connect a satellite receiver to this unit’s input terminals (➔ 11).
Turn on the satellite receiver.
Turn on the television and select the appropriate video input to suit the
connections to this unit.
•
•
•
to turn the unit on.
to select “AV2”.
Tips
When “Power Save” is set to “Off” (➔ 84),
you can watch the satellite programme
without turning the unit on.
Tips
To select Digital TEXT (MHEG) and
subtitles (➔ 52)
To select change DVB Multi Audio
(➔ 75, DVB Multi Audio)
Notes
You cannot watch satellite programmes
during timer recording.
To Next Page
Loading...
Need help?
General
