Panasonic Diga DMR-EX98VEB User Manual

36
RQT9089
2a
to delete.
You cannot delete programmes that are
currently recording.
2b
to modify the programme.
e
,
r
,
w
,
q
to make changes,
then
2c
When a programme with is selected
then follow the on-screen
instructions to resolve overlapping.
If the programme was set from the TV Guide,
the available repeat programmes are displayed.
Press [
e
,
r
] to select, then press [OK].
–
–
Tips
You can enter up to 32 programmes a month in advance.
You can also delete a programme with the following steps
1. Press [
e
,
r
] to select the programme and press [OPTION].
2. Press [
e
,
r
] to select “Delete” and press [OK].
To exit the timer recording list
Press [PROG/CHECK].
Notes
Recording may fail if there are changes to the station’s programming.
“
z
” disappears from the unit’s display when no timer programme is
set or when all timer programmes are deactivated.
“-------” is displayed on a series recording item if there will be no
episode of the series for the next 8 days. We recommend you
delete the “-------” item after you confirm the last episode of the
series is recorded.
The “Guide Link” function may not work if you manually change the
start/end time by over 10 minutes.
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
HDD
RAM
-R -RW(V) +R +RW VHS
After performing step (➔ 35, right column)
(Red)
“
z
” (➔ 35) disappears from the timer
recording list.
Press the “Red” button again to activate timer
programme.
–
–
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform step (➔ 35, right column).
1. Press [OPTION].
2. Press [
e
,
r
] to select “Timer Off”, then press [OK].
•
•
•
•
•
•
Relief Recording
RAM
-R -RW(V) +R +RW
When the recording drive is “DVD” and there is not
enough remaining blank space, recording automatically
switches to the “HDD”. If there is no disc in the tray or
the disc cannot be recorded on or when timer recording
starts while copying, the recording drive will be altered
to the HDD.
The Direct Navigator shows which programmes were
relief-recorded (“ ” is displayed.) (➔ 35).
If the time remaining on the HDD is insufficient, as
much of the programme as possible will be recorded
onto the HDD.
Auto Renewal Recording
HDD
If you record a programme onto HDD repeatedly
everyday or every week using timer recording, the unit
will record the new programme over the old one.
This function can be used only when weekly
recording or daily recording is selected.
e
,
r
to select the programme,
then
w
,
q
to select “RENEW” column.
e
,
r
to select “ON”, then
Timer
Recording
1:58 SP
DVD
30:24 SP
1:59 SP
StoptName
22:3022:00SUN HDD
1 BBC 1
Programme Name
SP
STTL
OFF
RENEW
ON
All Services : BBC 1
Drive Mode
Date
Remain HDD
VHS
FRI 10/10/08 12:54:00
Star
Notes
If a programme set for Auto Renewal Recording is protected
or while playback is taking place from the HDD, or while
copying, the programme will not be overwritten. Instead the
programme set for recording will be saved as a separate
programme, and this programme will be the one to be
overwritten when the next Auto Renewal Recording takes
place.
Playlists made from programmes that were set for Auto
Renewal Recording are deleted along with auto renewal.
When there is not enough space on the HDD, the
programme may not be recorded completely.
•
•
•
•
•
Advanced Timer Recording
RQT9089-BDMR-EX98VEB.indb36RQT9089-BDMR-EX98VEB.indb36 2008/04/2319:00:052008/04/2319:00:05

Panasonic Diga DMR-EX98VEB Specifications

General

Brand	Panasonic
Model	Diga DMR-EX98VEB
Category	DVD Recorder
Language	English