Philips DVDR615 User Manual

Connecting audio devices to the digital
audio jack
The rear of the DVD Recorder features a digital DIGITAL AUDIO OUT out jack for a coaxial
cable.
It can be used to connect the following devices:
•) an Audio/Video receiver or an Audio/Video amplifier with a digital multi-channel
sound decoder
•) a receiver with two-channel digital stereo (PCM)
Digital multi-channel sound
Digital multi-channel sound provides maximum sound quality.
Consult the instruction manual of your receiver to find out which audio
formats it supports.
/
xA loud distorted sound is coming from my speakers
¢" The receiver does not support the digital audio format of the DVD
recorder. The audio format of the inserted DVD is displayed in the
display panel when another language is switched on. Playback using
6-channel digital surround sound is only possible when the receiver Problem
has a digital multi-channel sound decoder.
Connecting additional devices 21

Philips DVDR615 Specifications

Picture/Display

Aspect ratio	4:3, 16:9
D/A converter	10 bit, 54 MHz
A/D converter	10 bit, 54 MHz

Sound

D/A converter	24 bit, 96 kHz
A/D converter	24 bit, 96 kHz
Signal to noise ratio	90
Distortion and Noise (1kHz)	83 dB
Crosstalk (1kHz)	105 dB
Dynamic Range (1kHz)	83 dB

Power

Power supply	110V, 60Hz
Power consumption	27 W
Standby power consumption	< 4 W

Dimensions

Set dimensions (W x H x D)	435 x 285 x 65 mm
Set weight	3.5 kg
Packaging dimensions (W x H x D)	518 x 159 x 383 mm
Weight incl. Packaging	5.5 kg