10.5: 1
BASE GASKET THICKNESS
Name Measure A Thickness
MEASURE TAKEN «A» - 0.185 ÷ - 0.10 0.4 ± 0.05
MEASURE TAKEN «A» - 0.10 ÷ + 0.10 0.6 ± 0.05
MEASURE TAKEN «A» + 0.10 ÷ + 0.185 0.8 ± 0.05
N.B.
VALUES INDICATED WITH «-» REFER TO RECESSES OF THE PISTON CROWN FROM THE
CYLINDER PLANE.
N.B.
SIZE «A» MUST BE MEASURED WITHOUT ANY GASKET FITTED AT «B»
Products
RECOMMENDED PRODUCTS TABLE
Product Description Specifications
AGIP GEAR SAE 80W-90 Lubricant for gearboxes and transmis-
sions.
API GL-4
eni i-Ride PG 5W-40 Synthetic based lubricant for high-per-
formance four-stroke engines.
JASO MA, MA2 - API SL - ACEA A3
AGIP FILTER OIL Special product for the treatment of foam
filters.
-
AGIP GP 330 Water repellent stringy calcium spray
grease.
R.I.D./A.D.R. 2 10°b) 2 R.I.Na. 2.42 -
I.A.T.A. 2 - I.M.D.G. class 2 UN 1950
Page 9022 EM 25-89
AGIP BRAKE 4 Brake fluid. SAE J 1703 -FMVSS 116 - DOT 3/4 - ISO
4925 - CUNA NC 956 DOT 4 synthetic
fluid
AGIP PERMANENT SPECIAL Ethylene glycol-based antifreeze fluid
with organic inhibition additives. Red,
ready to use.
ASTM D 3306 - ASTM D 4656 - ASTM D
4985 - CUNA NC 956-16
MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Characteristics
CHAR - 19
To Next Page
Loading...
Need help?
General