Brake pipes
FRONT BRAKE CALLIPER PIPES REMOVAL
- The operations described refer to only one cal-
liper but apply to both.
- Disconnect the brake pipes from the calliper and
drain the brake fluid.
- Remove the brake oil tube fitting from the rigid
pipe inside the front suspension arm and loosen
the hydraulic joint fixing nut of the suspension lock-
ing to release the brake pipes.
- Cut the tie.
- Unscrew the two fixing bolts shown in the picture
to release the brake pipes and slide it off the fork.
Braking system MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA
(2015)
BRAK SYS - 388
To Next Page
Loading...
Need help?
General