N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
Anti-evaporation system
Removing system components
To access the canister system components:
- Open the saddle.
- Undo the fixing screws of the system components
cover.
- Remove the components from their seat acting
on the rubber supports.
Refitting system components
To refit, proceed in reverse order, taking care to use new metal clamps to fix the pipes.
Canister inspection
The canister is essential to treat the hydrocarbons present in the volume of gas that escapes from the
tank when there is an increase in internal pressure (tank heating induced by the cooling radiator, by the
motor or by the external environment).
The volume of air is limited by the operation of the ventilation valve (Roll-over).
MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Maintenance
MAIN - 49
To Next Page
Loading...
Need help?
General