Removal
- Remove the brake calliper.
- Remove the Benzing snap ring of the pad pin.
- Slide off the pin paying attention to collect the
retaining spring of the pads.
- Remove the pads.
Characteristic
Minimum value
1.5 mm
Refitting
- Follow the removal steps but in reverse order; check that the Benzing snap ring of the pads is in good
conditions.
Rear brake pads
Braking system MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA
(2015)
BRAK SYS - 386