PIAGGIO X7 250ie User Manual

-Complete the fitting by tightening the nuts on the relative bolts to the proper tightening torque.
Locking torques (N*m)
Engine and vehicle side swinging arm junction bolt 33 ÷ 41 Nm Swinging arm pin - Engine 64 -
72 Body shell - Swinging arm pin 76 ÷ 83 Screw fixing the silent-block support plate to the
body 42 ÷ 52
Shock absorbers
Removal
- Rest the scooter on its centre stand.
- Slightly lift the engine using a jack to free both
shock absorbers.
- Remove the silencer.
- Unscrew the shock absorber spring unit fixing
screw from the support fixed to the engine on one
side, and from that fixed to the muffler support on
the other.
- Undo the two upper nuts (one on each side) fixing
the shock absorber spring unit to the frame and
remove the shock absorbers themselves.
Refitting
Carry out the previous operations but in reverse order.
Locking torques (N*m)
X7 250ie Suspensions
SUSP - 27

PIAGGIO X7 250ie Specifications

General

Brand	PIAGGIO
Model	X7 250ie
Category	Scooter
Language	English