EasyManuals Logo

Pioneer VSX-LX52 User Manual

Pioneer VSX-LX52
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Using other functions
08
67
En
Resetting the system
Use this procedure to reset all the receiver’s settings to
the factory default. Use the front panel controls to do this.
Set MULTI-ZONE to OFF.
Disconnect the iPod and USB memory device from
the receiver beforehand.
1 Switch the receiver into standby.
2 While holding down
ENTER
on the front panel,
press
STANDBY/ON
.
The display shows RESET NO .
3 Select ‘
RESET
’ using
PRESET +/–
, then press
ENTER
on the front panel.
The display shows RESET? OK.
4Press
ENTER
to confirm.
OK appears in the display to indicate that the receiver
has been reset to the factory default settings.
Note that all settings will be saved, even if the
receiver is unplugged.
Default system settings
Setting Default
Digital Video Conversion ON
SPEAKERS A
Surround Back System Normal
Speaker System Front SMALL
Center SMALL
Surr SMALL
SB SMALLx2
SW YES
Crossover 80 Hz
X-Curve OFF
THX Audio Setting 1.2 m<
DIMMER Brightest
Inputs
See Input function default and possible settings on page 42.
MULTI-ZONE
ZONE 2/3 Volume Level Variable
ZONE 2/3 Volume –60 dB
HDMI
HDMI Audio Amp
HDMI output HDMI OUT ALL
KURO LINK ON
DSP
Surround back channel Processing ON
Phase Control ON
Sound Retriever
iPod/USB function
ON
Other functions
OFF
Sound Delay 0.0 frame
Dual Mono CH1
DRC AUTO
SACD Gain 0 dB
LFE Attenuate 0 dB
Auto delay OFF
Up Mix ON
Digital Safety OFF
Effect Level EXT.STEREO 90
Other modes 50
2 PL II Music
Options
Center Width 3
Dimension 0
Panorama OFF
Neo:6 Options Center Image Neo:6 MUSIC: 3
Neo:6 CINEMA: 10
All Inputs Listening Mode
(2 ch)
AUTO
SURROUND
Listening Mode
(x ch)
AUTO
SURROUND
Listening Mode (HP) STEREO
See also Setting the Audio options on page 61 for other default
DSP settings.
MCACC
MCACC Position Memory M1: MEMORY 1
Channel Level (M1 to M6) 0.0 dB
Speaker Distance (M1 to M6) 3.00 m
Standing Wave
(M1 to M6)
ATT of all channels/
filters
0.0 dB
SWch Trim 0.0 dB
EQ Data (M1 to M6) All channels/bands 0.0 dB
EQ Trim 0.0 dB
Setting Default
VSX-LX52_DFLXJ.book 67 ペー 00年61日 月曜 午9時9分

Table of Contents

Other manuals for Pioneer VSX-LX52

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer VSX-LX52 and is the answer not in the manual?

Pioneer VSX-LX52 Specifications

General IconGeneral
BrandPioneer
ModelVSX-LX52
CategoryReceiver
LanguageEnglish

Related product manuals